Manuals / Dish Network / TV and Video / Universal Remote

Dish Network EZ manual How To Use The Remote Control

Models: EZ

1 52

Download 52 pages 3 Kb

Page 26

HOW TO USE THE REMOTE CONTROL

This section describes how to use your DISH Network Remote Control. Figure 1 on page 2 shows the remote control with a brief description of the buttons.

POINTING THE REMOTE CONTROL

The remote control uses infrared (IR) light signals to control the satellite receiver and TV. IR signals travel about 40 feet or less and cannot go through walls or other solid objects. To operate a device, you must point the remote control at the device, with no objects in the way.

USING THE REMOTE CONTROL FOR SATELLITE TV PROGRAMMING

SATELLITE CHANNEL CONTROL BUTTON

To use the remote control to get satellite TV programming and operate the satellite receiver, you must first press , which will do three things:

•Turns on the satellite receiver.

•Tunes your TV to the channel (3 or 4) you use to watch satellite TV programming (this function only

works if you have completed the instructions in

Setting Up to Switch the TV to Watch Satellite Programming on page 5).

•Makes the remote control buttons work as described below to support watching satellite TV programming.

SAT SAT POWER BUTTON

Press the SAT POWER button to turn the satellite receiver ON or OFF.

118866

25

Image 26

Dish Network EZ manual How To Use The Remote Control, Setting Up to Switch the TV to Watch Satellite Programming on page

Contents

RemoteControlUserSELECT EZDISHCANCELtwrkEPOWER 1 2 4 5 7 8Receiver Upgrade CONTENTS OF THIS GUIDEInstalling Batteries Limited Warranty118866 Figure 1. The EZ RemoteSee How to Use the Remote Control for more details on ABOUT THE DISH NETWORK EZ REMOTE CONTROL BUTTONS AND FEATURES OVERVIEWINSTALLING BATTERIES RECEIVER UPGRADE SETTING UP TO SWITCH THE TV TO WATCH SATELLITE PROGRAMMING1. Connect a coaxial cable between the TV Set Out on none work, go to How to Scan for TV and VCR SETTING UP ON YOUR REMOTE CONTROL 8. Press and hold SELECT” to the right in Column Table 1 How I Change My TV Channels118866 Fill in this blank with the exact sequence you circled in Table SETTING UP TO SWITCH THE TV TO A PREFERRED OFF-AIR CHANNEL SETTING UP ON THE REMOTE CONTROL SETTING UP TO PASS SATELLITE PROGRAMMING THROUGH YOUR VCR TO YOUR TVyour VCR to pass satellite programming using will not work SETTING UP THE REMOTE TO CONTROL YOUR VCR 3. Press T V to turn on your TV Press and hold the to the right in Column 2 and go to Table 2 How I Change My VCR Channels118866 USING WHEN A VCR IS INSTALLED to Pass Satellite Programming Through Your VCR toOTHER REMOTE CONTROL INSTRUCTIONS HOW TO SCAN FOR TV CODESHOW TO SCAN FOR VCR CODES HOW TO CHECK THE TV CODES HOW TO CHECK THE VCR CODESHOW TO REMOVE TV CODES HOW TO REMOVE VCR CODESHOW TO USE THE REMOTE CONTROL Setting Up to Switch the TV to Watch Satellite Programming on pagePress the MENU button to open the Main Menu Change channels - Press the UP or DOWN button View - Press and hold the CANCEL button until both Press and hold the RECALL button until both To use the remote control to get programs from an off-air Use the CHANNEL UP/DOWN buttons to change channels on the TV TV CODES TV AND VCR CODESCode 118866TV Brand Code 118866TV Brand Code 118866TV Brand Code 118866TV Brand Code 118866TV Brand Code 118866TV Brand TV Brand VCR CODES118866 CodeCode 118866VCR Brand Code 118866VCR Brand Code 118866VCR Brand Code 118866VCR Brand Code 118866VCR Brand LIMITED WARRANTY 118866118866 ADVANCE EXCHANGE PROGRAMPOST RECEIPT EXCHANGE PROGRAM ACCESSORY WARRANTY118866 IF YOU NEED HELP118866 7. We willWIRELESS REMOTE CONTROL SAFETY INSTRUCTIONSREMOTE CONTROL COMPATIBILITY INSTALLATIONTechnical Publications, 94 Inverness Terrace East Englewood, Colorado Copyright EchoStar Technologies Corporation Englewood, ColoradoEchoStar Technologies Corporation 118866