HOW TO SCAN FOR VCR CODES

If the code for your VCR is not in the VCR Codes tables starting on page 39, complete the following instructions to scan for your VCR’s code.

1.

Make sure your VCR is on.

2.

Hold

until

SATT V

lights turn on (it takes

 

about five seconds).

 

3.

Release

. T V

light flashes.

4.

Press the RECALL button.

T V light stays on.

5.Pressor until the VCR turns OFF. You will have to do this repeatedly to scan through all codes.

Note: If T V flashes eight times, you have tried every code in the remote control.

6. Press the MUTE to finish programming the remote control. The T V light will flash three times.

7.Press while looking at the channel number display on your VCR. If the VCR is trying to change channels to Channel 3 (or 4), you have found the correct code for your VCR and you may

want to go back to page 17 to set up . If the VCR is not trying to change channels, go back to step 2 to find another code.

Note: The way your VCR displays channel numbers may differ from the description above. See the User’s Guide that came with your VCR for more information.

22

118866

Page 23
Image 23
Dish Network EZ manual Lights turn on it takes