Dish Network Solo 301 Control a Tuner or Amplifier AUX Mode Button, Power Button, Select Button

Control Other Devices with the Remote

CONTROL A TUNER OR AMPLIFIER

Some of the features described below may not apply to your tuner or amplifier. See the device owner’s manual for details about the device’s features. If a remote control button is not described in this section, it does not work for a tuner or amplifier.

AUX MODE BUTTON

To use the remote to operate a tuner or amplifier, first set up the remote to control the device, then press the AUX mode button to set the remote to AUX mode. The AUX mode button’s backlight turns ON to show that the remote is set to AUX mode. Make sure to keep the remote in AUX mode to use the buttons as described in this section.

POWER BUTTON

Press the blank POWER button to turn the tuner or amplifier ON or OFF.

SELECT BUTTON

This SELECT button works as the Input Select button for a tuner or amplifier.

UP/DOWN (ARROW) BUTTONS

Use UP/DOWN ARROW buttons to change channels on the tuner or amplifier.

MUTE BUTTON

Press the MUTE button to turn off the sound. Press it again to restore the sound.

VOLUME BUTTON

Press the minus (-) side of this button to lower the sound volume. Press the plus (+) side of this button to raise the sound volume.

Note: See Using TV or Amplifier Volume Control to set up the remote control to use the MUTE and VOLUME buttons.

Page 15

Page 15