Chapter 2
Parts of the System
5.Press the either the UP or
DOWN ARROW button repeatedly until the device turns off.
6.Press the POUND (#) button.
7.Turn the device back on and try some other buttons to make sure they work.
8.Repeat this procedure until you’ve tried all the codes.
As you press the UP or DOWN ARROW button, the remote is trying each code in the memory to see if it can turn off your device. When the device turns off, you have found a code that might work.
Note: The mode button for the device will flash rapidly eight times when you’ve scanned all the codes for that device.
This stores the code you found.
Press the POWER button to turn the device back on. Try some other buttons to make sure they work. Sometimes, the POWER button works when other buttons don’t.
You may need to repeat the scan to find the best code for your device.
Tip: This procedure explains how to find out the device code you set for
CHECK THE DEVICE CODES
You can find out what device code you’ve set for each remote mode.
1. Press and hold the mode | For example, hold the TV mode |
button until all the other mode | button for a TV until all of the other |
buttons light up, and then let | mode buttons light. When you let |
go of the button. | go, the TV mode light will flash. |
The mode button flashes. |
|
each remote control mode.
2.Press the POUND (#) button twice. Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.
For AUX mode only. The first
group of flashes tells you what the AUX mode controls. A quick flash (zero) before the
For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.
For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.
Page 14
