Eagle Electronics 642c iGPS manual Navigate to Cursor Position on Map

Navigate to Cursor Position on Map

The GO TO CURSOR command navigates to the current cursor position on the map. It is a quick way to navigate to anything you can see on the map display.

1.Use the cursor with the zoom in and zoom out keys to move around the map until you find a location you want to go to.

2.Center the cursor over the location to select it. See the example in the following figure. Map items like waypoints, Points of Interest and towns among others, can be selected and appear highlighted with a pop-up box. Other features, such as a river or a street intersection will not appear highlighted, but the cursor will take you to those locations just the same.

The cursor crosshairs are centered on Oologah, Oklahoma.

3.Press MENUENT and the unit will begin navigating to the cursor lo- cation.

The Map Page will display a red line from your current position to the cur- sor position. The Navigation Page displays a compass rose showing naviga- tion information to your destination. See the following examples.

43