1.Insert the MMC into your unit. Press MENUMENU↓ to SYSTEM
SETUPENT↓ to TRANSFER MY DATAENT.
2.The Transfer My Data menu includes a message which tells you if an MMC is present or not. If no MMC is present, you must insert a card into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press ENT (for SAVE.)
To transfer data from the MMC to the unit: press → to LOADENT.
3.Saving to MMC: To accept the default name "Data" for the GPS Data File, press ↓ to SAVE DATAENT. If you want to rename the file (as
shown in the following figures), press ENT to activate the selection box. Press ↑ ↓ to change the first character, then press → to the next char- acter and repeat until the name is correct. Then press ENT↓ to SAVE
DATAENT.
The unit will display first a progress then a completion message when the data transfer is finished. To return to the Page view, repeatedly press EXIT.
These figures (from left to right) show the menu sequence for naming
and saving a GPS Data File from the unit's memory to an MMC.
4.Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press ENT to activate the selec- tion box, use ↓ ↑ to highlight the file, then press ENT to accept the se- lection. Next, press ↓ to LOAD DATAENT. The unit will display a comple- tion message when the data transfer is finished. To return to the main page display, press EXIT repeatedly.
51
