Main Menu (left). Trails Menu (center). Trail Options (right).
General Trail Options
To access the Trails Menu press MENUMENU↓ to MY TRAILSENT.
Delete All Trails
From the Trails Menu, press → to DELETE ALLENT← to YESENT.
Update Trail Option
This menu lets you change the way the trail updates occur.
From the Trails Menu, press → to TRAIL OPTIONSENT. With UPDATE ACTIVE TRAIL highlighted, press ENT to turn it on (check) or turn it off (uncheck).
WARNING:
If you uncheck the Update Trail option, automatic trail creation and recording will be turned off. You must turn it on to record trails. The default setting is on.
Update Trail Criteria
The options are automatic, time or distance. When it is in the default mode, the unit does not update the plot trail while you are traveling in a straight line. Once you deviate from a straight line, the unit drops a plot point onto the trail. This conserves plot trail points. If a plot trail uses all the available points allotted to it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to OPTIONSENT. Select one of the three Update Criteria options — Auto, Time or Distance — and press ENT.
Trail Update Rate
A trail updated by time has a range of 1 to 9999 seconds. The default is 3 seconds. The range for updating a trail by distance is 0.01 mile/nm/km to 9.99 mile/nm/km. The default is 0.10 mi.
When time or distance are chosen as the update criteria for a trail, a dialog box will appear, allowing you to input the desired update rate or distance. Select the dialog box and press ENT. Use ↑ ↓ to change the
94
