2. Input “cmd”, and then click “OK”.
3.Input “ipconfig”, then press “Enter”. Use the IP address following “Default Gateway” to access this router’s web‐based configuration interface. Please note that the IP address you find may be different from this illustrated example.
NOTE: If there is no IP address following “Default Gateway”, or if the address following “IP Address” begins with “169”, please try the following procedures:
zRecheck the cable connection between the computer and the router.
zGo to the beginning of this chapter and recheck every step of the setup procedure.
zIf both of the above fails, reset the broadband router.
2‐4 Using “iQ Setup”
This broadband router’s “iQ Setup” feature allows you to set up basic parameters in a few simple steps.
1. Click “Quick Setup” after logging in.
15
