Item Name | Description |
Band | Select from one of the following options: |
| 2.4GHz (B): Allows 802.11b wireless network clients |
| to connect to this router. |
| 2.4GHz (N): Allows 802.11n wireless network clients |
| to connect to this router. |
| 2.4GHz (B+G): Allows 802.11b and 802.11g wireless |
| network clients to connect to this router. |
| 2.4GHz (G): Allows 802.11g wireless network clients |
| to connect to this router. |
| 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and |
| 802.11n wireless clients to connect to this router |
| (recommended). |
ESSID | This is the name of your router. You can type any |
| alphanumerical character here (maximum 32 |
| characters). |
Site Survey | Click “Select Site Survey” and a pop‐up window will |
| appear. All reachable wireless access points will be |
| shown in the window. Select a wireless access point |
| from the list, and click “Done” to establish a |
| connection. Clicking “Refresh” will renew the list. |
Wireless Module | Select “Enable” to turn on the 2.4GHz wireless |
| signal and select “Disable” to turn it off. |
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.
41
