Item Name | Description |
Enable Virtual Server | Check this box to enable the virtual server function. |
Private IP | Please input the private IP address of the device in the |
| local network here. |
Computer Name | Computer names found in the local network are listed |
| here. You can select a computer name and click the |
| “<<” button to add the selected computer’s private IP |
| address to the “Private IP” field. |
Private Port | Input the port number of the private IP address here. |
Type | Select the connection type (TCP or UDP) here. If you |
| are not sure, please select “Both”. |
Public Port | Input the port number of the Internet IP address here. |
Comment | You can add an optional note in the “Comment” field. |
| Up to 16 alphanumerical characters are supported. |
Add | Click “Add” to add the settings to the virtual server |
| table. |
Reset | Click “Reset” to clear all the settings. |
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.
61
