Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Choose Component by pressing COMPONENT button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Remote Control

COMPUTER 2 button

1 2

COMPONENT button

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

2 Press the Point ▲▼ buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.

3 After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button.

Component When the input source is coming from video equipment connected to the

COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component.

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Move the pointer to Component or RGB(Scart) and press the SELECT button.

RGB (Scart)

Note:

When the input source is coming from video equipment connected to the

COMPUTER IN 2/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).

When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.46).

38

Page 38
Image 38
Eiki LC-XS25, LC-XS30 owner manual Input Source Selection Component, RGB Scart 21-pin, Computer 2 button Component button