Eiki LC-XS25, LC-XS30 Input Source Selection Rgbpc digital, Rgbav Hdcp, Computer 1 button

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 1 (Digital) by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Remote Control

COMPUTER 1 button

1 2

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

2 Press the Point ▲▼ buttons to move the red arrow pointer to Computer 1 (Digital) , and then press the SELECT button.

3 After the Source Select Menu appeared for Computer 1 (Digital), move the pointer to RGB (PC digital) or RGB (AV HDCP), and then press the SELECT button.

Computer 1 (Analog)

Computer 1 (Digital)

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

Notes:

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•When the Input Search function is set On1 or On2, the input signal will be searched automatically. (p.46)

26