Appendix
|
| Indicators |
|
| ||
POWER | WARNING | WARNING | LAMP | Projector Condition | ||
REPLACE | ||||||
TEMP. | FILTER | |||||
red/green | red | orange | yellow |
| ||
|
|
|
|
| The projector has been cooled down enough and the | |
|
|
| | | temperature returns to normal. When turning on the | |
red |
|
| projector, the WARNING TEMP. indicator stops blinking. | |||
|
|
|
| Check and replace the filter. | ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
| |
| The lamp has been used overtime. Replace the lamp | |
Any |
|
| immediately and then reset the lamp counter. The | |||
|
|
|
| yellow | indicator will be turned off after resetting the counter. | |
|
|
|
|
|
| |
|
|
|
|
| If the Filter counter reached a time set in the timer setting, | |
Any |
|
| | a Filter replacement icon (Fig.2) appears on the screen | ||
|
|
| orange |
| and the WARNING FILTER indicator on the top control | |
|
|
|
|
| lights up. Replace the filter as soon as possible. If the | |
|
|
|
|
| filter is out of scroll and the projector reaches a time set | |
|
|
|
|
| ||
|
|
|
|
| in the timer setting, Fig. 3 appears on the screen and the | |
|
|
|
|
| WARNING FILTER indicator lights up. Replace the filter | |
Fig.2 | Filter replacement icon |
| cartridge as soon as possible.If the filter is clogged and | |||
| no scroll is left in the filter cartridge, | |||||
|
|
|
|
| a Filter cartridge replacement icon (Fig.4) appears on the | |
|
|
|
|
| screen and the WARNING FILTER indicator lights up. | |
|
|
|
|
| Replace the filter cartridge as soon as possible. | |
Fig.3 |
|
|
|
| Note: | |
|
|
|
|
| Fig.2, Fig.3 and Fig.4 icon will not appear when the | |
|
|
|
|
| Display function is set to “Off” (p.47), during “Freeze” | |
|
|
|
|
| (p.23), or “No show” (p.24). | |
Fig.4 | Filter cartridge replacement icon |
|
| |||
|
|
|
|
|
| |
|
|
|
|
| The filter cartridge is not installed in the projector. Check | |
|
|
|
|
| the filter compartment to see if the filter cartridge is | |
|
|
| blinking fast | blinking fast | installed in the projector. When the filter cartridge is | |
|
|
| installed and the indicators continue to light and blink, | |||
|
|
| orange | yellow | ||
|
|
|
|
| read the column below. | |
|
|
|
|
|
| |
|
|
|
|
| The projector detects an abnormal condition and cannot | |
|
|
|
|
| be turned on. Unplug the AC power cord and plug it again | |
|
|
| | | to turn on the projector. If the projector is turned off again, | |
|
|
|
|
| unplug the AC power cord and contact the dealer or | |
|
|
|
|
| the service center. Do not leave the projector on. It may | |
|
|
|
|
| cause an electric shock or a fire hazard. | |
|
|
|
|
|
|
When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59).
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p.62).
72