Setting
Fan
This function provides the following alternatives in the cooling fans' operation after turning off the projector. (p.19)
L1 . . . normal operation
L2 . . . slower and
Warning log
This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.
Note:
When the Factory default function is executed, all the warning log records will be deleted.
Lamp counter
This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 62 for operation.
Note:
Do not reset the Lamp replacement counter without implementation of lamp replacement. Be sure to
reset the Lamp replacement counter only after replacing the lamp.
Lamp replacement icon
This icon appears on the screen when the end of lamp life is reached.
Note:
This icon also appears at turning on and selecting input source.
55
