Setting
On start | On start |
When this function is "On", the projector is automatically turned on just by connecting the AC power cord to a wall outlet.
Note:
Be sure to turn the projector off properly (see "Turning Off the Projector" on page 19). If the projector is turned off in the incorrect sequence, the On start function does not operate properly.
Closed Caption | Closed Caption |
|
Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ◄► buttons to select CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text from Color to White.
Notes:
The Closed Caption is available only under the situation below.
•When the input signal is NTSC of composite and
•The system must be set on NTSC or Auto in Video System Selection. (P.39)
•The icon of Closed Caption is displayed in gray while it is not available.
•The closed caption is unavailable when
Lamp control
This function allows you to change brightness of the screen.
Normal . . . . .
Auto . . . . . . .
Eco . . . . . . .
Note:
Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized.
51
