Part Names and Functions
Top Control
① |
| ② |
| ③ |
| ④ |
| ⑤ |
⑪ |
| ⑩ |
| ⑨ |
| ⑧ |
| ⑦ |
| ⑥ |
①POWER indicator
–Light red when the projector is in
–Light green during operations.
–Blink green in the Power management mode (p.50).
–Blink red during cooling down.
②LAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws to an end. (pp.60,
③WARNING TEMP.. indicator
Emit a red light when the projector detects an abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (pp.63,
④WARNING FILTER indicator
–Blink slow when the filter is being scrolled (pp.57, 71).
–Blink fast when the filter cartridge is not installed (pp.57, 72)
–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.55, 57, 72).
⑤POINT (▲▼) buttons
–Select an item or adjust the value in the
–Pan the image in Digital zoom + mode. (p.36)
⑥SELECT button
–Execute the selected item. (p.20)
–Expand or compress the image in Digital zoom mode. (p.36)
⑦POINT (◄►) buttons
–Select an item or adjust the value in the
–Pan the image in Digital zoom + mode. (p.36)
–Adjust the volume level. (p.23)
⑧MENU button
Open or close the
⑨INPUT button
Select an input source.
⑩AUTO SETUP button
Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu.(pp.22, 24, 28, 46)
⑪POWER
Turn the projector on or off. (pp.18, 19)
10
