4 Condition selection for sending alert message
Check the condition items under which alert messages will be sent and click Set button.
A free message can be sent when the lamp use time reach- es the preselected lamp use time.
Check this condition and enter a setting time. Type a free message on “Attached Message” text box and the click Set button.
*The length of message should be less than 256 characters.
*The lamp use time can be set 0 to 9999 hours.
If you check “When a connection error occurs during an auto play.”, the projector sends an alert message when the error occurs while the projector projects images automatically by using the Network Viewer function (☞ p.72). For the detail of error contents, please see item “Auto display setting and control page[3]”. (☞ p.74)
Examples: Type and contents of alert mail
When the projector has an abnormality, the following alert messages are sent to the registered
The following are examples of received messages.
●When the internal temperature is too high:
TITLE: Message from projector
Projector Model Name: X50
TCP/IP: 192.168.1.201 Projector Name: myProjector
It sends you following message.
*The Projector lamp is turned off, because internal projector temperature is too high.
Wait Temperature Warning Indicator turned off,turn the Projector on again. If the Indicator continues to flash,check the air filter for dust accumulation.
[A]36.5 Degree [B] 46.5 Degree [C] 58.2 degree Temperature of Sensor C is too high.
ENGLISH
✐The Network Unit let users know the information which thermal sensor [A], [B] or [C] inside the projector detected the abnormal temperature risen and so the projector was turned off. Please refer to item “Check the status of projector” for the location of the sensors [A], [B] and [C], and temperature (☞ p.39). Also see the owner's manual of the projector for further details.
Network Unit
OWNER’S MANUAL
35
