
Check the status of projector
Check the status of projector
In the “Power & Status” page, you can control the projector power, and also you can check the status of the projector as follows. To change the page, click on the page number linked text.
Items | Description | |||||
Accumulated |
|
|
|
|
|
|
Displays the accumulated lamp use time in hour units (h). | ||||||
Accumulated |
|
|
|
|
|
|
Displays the accumulated projector use time in hour unit (h). | ||||||
Power Status | .................. | Displays the status of the lamp. | ||||
Projector Condition | Displays the status of the projector's power. | |||||
Input Status | Displays the selected input mode. | |||||
Selection | Displays the source mode of selected input mode. | |||||
Signal Status | .................. | Displays the signal status of the selected input mode. | ||||
Internal temperature | Displays the temperature at internal thermal sensors in centigrade/ fahren- | |||||
|
| heit degrees. The icons [A], [B] and [C] on the page represent the thermal | ||||
|
| sensors located in the projector. If the temperature at one of those sensors | ||||
|
| exceeds specified temperature, the appearance of its icon changes to the | ||||
|
| following alert icon to let users know the abnormal temperature. Please | ||||
|
| check surrounding temperature of the projector, the clogged air filters and | ||||
|
| the area surrounding the ventilation fans. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH
The icons [A], [B] and [C] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector*.
[B]: Surrounding temperature of the lamp.
[C]: Surrounding temperature of the panel.
*The indicated peripheral temperature of the projector is a little higher than actual surrounding temperature.
Network Unit
OWNER’S MANUAL
39