Eiki PjNET-20 owner manual Control by the projector, Internet, Intranet, English

Network Viewer

[2]Control by the projector

Select input mode to

“Network” previously.
1 Display the menu bar					Project JPEG
		PC1	PC2		images with PJ2.
on the projected screen					JPEG
by pressing the MENU
button on the projector				Internet	PJ2	PJ1
or the remote control		PC3	PC4
				Intranet
unit.					PC5
2 Select	“Network	JPEGJPEG
		JPEG
setting”	icon by	* ftp file servers
using the point but-
tons (7/8) and press SELECT
button once. Check the mode is
“On”.
3 Select “Network Viewer” icon by
using the point buttons (e/d) and
then press SELECT button. The
setting window will appear.
4 Set as follows to setup the display
mode;

Auto-Display: Select “Auto” and press SELECT button and the set the display period and repeating times by using the point buttons.

Manual Display: Select “Manual” and press SELECT button.

5 Select “Connect” and then press

SELECT button. The projector downloads the images from the file server and proj- ects them on the screen.

*In the automatic displaying mode [Auto], when the left-click button on the remote control unit is pressed, projector stops automatic displaying and sets into the manual displaying mode. When pressing the right-click button, it starts automatic displaying again.

*During the displaying, you can browse images backward or forward by using point buttons (e/d) on the remote control unit or on the projector.

6 To disconnect from the file server, select “Disconnect” and press SELECT button.

*The image data used for this function are the program or folder that the Network Viewer function used last time. The projector cannot specify particular images or file servers itself.

*1 to 255 repeating times can be set. The mark “∞“ represents endless display.

*3 to 240 seconds can be set for the display period. The display period is greatly affected by the network environment or the operation of multi control, so it may not display the image as the specified display period.

ENGLISH

Network Unit

OWNER’S MANUAL

77