Eiki PjNET-20 owner manual Control, Load and apply the setting value, English

Control

Control

Display the control page by clicking on Multi Control on the multi-control page. The setting pages are construct- ed from 1 to 6 page and each item is indicated on the next page.

Load and apply the setting value

The control sets saved for each projector (☞ p.54) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull-down menu button and then click Set button. The control values stored with selected set number for each projector will be applied to the indi- vidual projector assigned to that set. The control values will not be applied to all of the projectors under the multi-control.

ENGLISH

Network Unit

OWNER’S MANUAL

83