Operating Instructions
Clock Functions
COUNTDOWN
To set a countdown. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven.
COOK TIME
To set how long the oven is to be in use.
END TIME
To set when the oven is to switch off again.
TIME
To set, change or check the time.
(See also section “Before Using for the First Time”.)
3 General information
•Before setting the time always switch the appliance on using the mains button N.
•After a clock function has been selected the function will flash for
approx. 5 seconds. During this time the required times can be set or changed using the + or - time selection buttons.
•After the required time has been set the function will flash again for approx. 5 seconds. Then the function stays illuminated. The set time will begin to count down.
•The acoustic signal may be turned off by pressing any clock button.
26
