Elmo HARSFEN0602, HARmonica software manual 207, Contents of Text8, Contents of Text9

HARSFEN0602ElmoHARmonicaSoftwareManual		PRELIMINARYDRAFT
0x20		Not used
0x40	FLAG_Assign	System parameter can be assigned a value
0x80		Not used
0x100	FLAG_Operator	Virtual Assemby Code or operator
0x200	FLAG_SysFunc	System function
0x400	FLAG_Mnemonic	System command - Mnemonic
0x800	FLAG_String	Indicate this is a string command
0x1000	FLAG_Array	Command is not executed automatically upon reset
0x2000	FLAG_ResetIgnore	Indicate this is a string command
0x4000	FLAG_NotProgram	Command can’t be used from a user program
0x8000	FLAG_NotPdo	CAN binary interpreter can’t use command.

Example:

The value of 4100 is interpreted as 0x1000+0x4. It means that the related command is a report that returns a long integer.

The value of 4164 is interpreted as 0x1000+0x40+0x4. It means that the related command refers to a parameter that can be either set or reported.

207

16.2.6Contents of Text8

This text duplicates the definitions of the struct RecVarType within the file “ComVars.h”. The first line of the file is:

Recorded Signals = xxxx

Where xxxx is the number of recorded signals. Next come xxxx text lines with the format

{ RV index, Float_Flag , Length , Text name}

RV index specifies the signal index for use with the Harmonica RV command. Float_Flag = 1 for floating point quantity, 0 for integer

Length = 4 for short, 8 for long

Text name is a delimited text signal name like "Main Speed" Last comes

End Recorded Signals

16.2.7Contents of Text9

This file specifies the setup of the Harmonica.

It has the .ini format:

[Program Limits]

TextSpace=xxx

CodeSpace=xxx

MaxUserFuncs=xxx

MaxUserVars=xxx

NameLength=xxx

StackDepth=xxx

DataSpace=xxx

UserPartMaxSize=xxx

[Automatic Functions] AUTO_ERR=1 AUTO_DIN1=2

...

The [Program Limits] entries are: