Emerson 848L Mounting to a DIN Rail Without an Enclosure, Mounting to a Panel with a Junction Box

Rosemount 848L

Reference Manual

00809-0100-4696, Rev AA September 2004

Mounting to a DIN Rail Without an Enclosure

Figure 2-1. Mounting the 848L to a DIN Rail

To mount the 848L to a DIN rail without an enclosure, follow these steps:

1.Pull up the DIN rail mounting clip located on the top back side of the transmitter.

2.Hinge the DIN rail into the slots on the bottom of the transmitter.

3.Tilt the 848L and place onto the DIN rail. Release the mounting clip. The transmitter should be securely fastened to the DIN rail.

Mounting to a Panel with a Junction Box

Figure 2-2. Mounting the 848L junction box to a panel

848L without enclosure

DIN Rail Mounting Clip

DIN Rail

When inside of a plastic or aluminum junction box, the 848L mounts to a panel using four 1/4-20 x 1.25-in. screws.

When inside of a stainless steel junction box, the 848L mounts to a panel using two 1/4-20 x 1/2-in. screws.

Aluminum/Plastic	Stainless Steel
848L with aluminum or plastic box
Cover
Screws (4)	848L with a stainless steel box
	Mounting
	Screws (2)
Mounting
Screws (4)

Panel Panel

2-2