Emerson manual Rosemount 848L, Reference Manual, Transducer Type

Rosemount 848L

Reference Manual

00809-0100-4696, Rev AA September 2004

Table C-2. I/O Transducer Parameters

Numbe
r	Parameter	Description
29	TRANSDUCER_ TYPE_	Identifies the transducer that follows.
	2
30	XD_ ERROR_ 2	One of the error codes defined in FF-903 XD_ ERROR and Block Alarm Subcodes.
31	COLLECTION_	A directory that specifies the number, starting indices, and DD item IDs of the data collections in each
	DIRECTORY_ 2	transducer within a transducer block. For further information, please refer FF-902.
32	IN_ 5_ TAG	An identifier associated with discrete input 5.
33	IN5	The value and status of discrete input 5.
34	PULSE_ COUNT_ 5	The number of pulses that have occurred on IN5 since last reset.
35	IN_ 5_ CONFIG.IO_TYPE	The transducer type of discrete sensor 5.
35	IN_ 5_ CONFIG.FILTER	Any state change on IN5 that lasts for a duration less than this filter value, will be ignored by the device.
35	IN_ 5_ CONFIG.FAIL_	When the device detects a failure, IO5 will have its value set to this value.
	SAFE
36	IN_ 6_ TAG	An identifier associated with discrete input 6.
37	IN6	The value and status of discrete input 6.
38	PULSE_ COUNT_ 6	The number of pulses that have occurred on IN6 since last reset.
39	IN_ 6_ CONFIG.IO_TYPE	The transducer type of discrete sensor 6.
39	IN_ 6_ CONFIG.FILTER	Any state change on IN6 that lasts for a duration less than this filter value, will be ignored by the device.
39	IN_ 6_ CONFIG.FAIL_	When the device detects a failure, IO6 will have its value set to this value.
	SAFE
40	IN_ 7_ TAG	An identifier associated with discrete input 7.
41	IN7	The value and status of discrete input 7.
42	PULSE_ COUNT_ 7	The number of pulses that have occurred on IN7 since last reset.
43	IN_ 7_ CONFIG.IO_TYPE	The transducer type of discrete sensor 7.
43	IN_ 7_ CONFIG.FILTER	Any state change on IN7 that lasts for a duration less than this filter value, will be ignored by the device.
43	IN_ 7_ CONFIG.FAIL_	When the device detects a failure, IO7 will have its value set to this value.
	SAFE
44	IN_ 8_ TAG	An identifier associated with discrete input 8.
45	IN8	The value and status of discrete input 8.
46	PULSE_ COUNT_ 8	The number of pulses that have occurred on IN8 since last reset.
47	IN_ 8_ CONFIG.IO_TYPE	The transducer type of discrete sensor 8.
47	IN_ 8_ CONFIG.FILTER	Any state change on IN8 that lasts for a duration less than this filter value, will be ignored by the device.
47	IN_ 8_ CONFIG.FAIL_	When the device detects a failure, IO8 will have its value set to this value.
	SAFE
48	TRANSDUCER_ TYPE_	Identifies the transducer that follows.
	3
49	XD_ ERROR_ 3	One of the error codes defined in FF-903 XD_ ERROR and Block Alarm Subcodes.
50	COLLECTION_	A directory that specifies the number, starting indices, and DD item IDs of the data collections in each
	DIRECTORY_ 3	transducer within a transducer block. For further information, please refer FF-902.
51	OUT_ 1_ TAG	An identifier associated with discrete output 1.
52	OUT1	The value and status of discrete Output 1.
53	OUT_ 1_	The transducer type of discrete sensor 9.
	CONFIG.IO_TYPE
53	OUT_ 1_	Any state change that lasts for a duration less than this filter value, will be ignored by the device.
	CONFIG.FILTER
53	OUT_ 1_ CONFIG.FAIL_	When the device detects a failure, OUT1 will be set to this value.
	SAFE
54	OUT_ 2_ TAG	An identifier associated with discrete output 2.
55	OUT2	The value and status of discrete Output 2.
56	OUT_2_CONFIG.IO_TYP	The transducer type of discrete sensor 10.
	E
56	OUT_ 2_	Any state change that lasts for a duration less than this filter value, will be ignored by the device.
	CONFIG.FILTER
56	OUT_2_CONFIG.FAIL_	When the device detects a failure, OUT2 will be set to this value.
	SAFE

C-6