View Status Options
5.5View Output Status
The Output Status option allows you to view the current status of all four outputs.
To view the Output Status:
•From the Main Menu, use the arrows ↑↓ to choose View Status, then press Enter ↵.
•From the View Status Menu, use the arrows ↑↓ to choose View Output Status, then press Enter ↵.
5.5.1Output Status
The Output Status screen displays the status of each digital output.
Main Menu
>VIEW STATUS SYSTEM AND CONTROL
↑↓=NEXT ↵=SELECT
View Status Menu
VIEW ACTIVE ALARMS VIEW ALARM LOG VIEW EVENT LOG VIEW INPUT STATUS
> VIEW OUTPUT STATUS
The following details appear for digital outputs:
•the name of the output (for example, DEVICE_1)
•the current status
There are eight possible states for a digital output, as shown in Table 11.
Table 11 Digital output states
State | Description |
OPERATING | Device operating, or ON |
STANDBY | Device in standby mode |
ALARM | Device in alarm |
FORCE ON | Device forced ON by operator |
FORCE OFF | Device forced OFF by operator |
HW FORCE ON | Device forced ON by hardware switch |
PENDING | Pending delay timer |
NOT USED | Device not used |
Viewing Additional Output Data
Output Status
OUTPUT / STATUS | |
> DEVICE_1 | ALARM |
DEVICE_2 | OPERATING |
DEVICE_3 | OPERATING |
DEVICE_4 | OPERATING |
All output data may be viewed by scrolling beyond the four lines that appear on the LCD at one time:
•To view all outputs, use the arrows ↑↓.
•To return to the previous screen, press the ESC key.
23 | Liebert® AC4™ |
