Enterasys Networks ANG-1100 manual Setting Up the Internet Connection

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

Setting Up the Internet Connection

Internet configuration of the External side of the ANG-1100 involves choosing the type of IP address assignment the ANG-1100 will accept. The ANG can accept one of the following:

!A DHCP-assigned IP address - your network automatically sets the ANG’s IP address via the DHCP (Dynamic Host Configuration Protocol) server. This is the factory default setting.

!A Manual-assigned IP address - you or your network administrator set the ANG’s IP address and associated Subnet, Gateway, and DNS values. Consult with your Network Administrator for required values.

!A PPPoE (PPP over Ethernet) assigned IP address - your DSL provider transparently sets the IP address via the use of a Username and Password. Obtain this information from your service provider before you enter this data.

Begin Internet Setup by performing the following steps:

1Click the Internet Setup menu option.

The Internet Setup window appears as shown in Figure 15.

20 Aurorean Network Gateway-1100 User’s Guide