note:

If you’ve installed the automatic document feeder, remove it from the EPSON Stylus Scan, but don’t disconnect it from the option interface.

If you need to replace an ink cartridge before you see a message (because the ink is too old, for example) follow the instructions in “Replacing an Outdated Ink Cartridge” on page 125.

Removing and Installing Ink Cartridges

You can replace a cartridge whenever you see a message that the cartridge is low on ink or empty. (If you press the R cleaning button before you see a message, the EPSON Stylus Scan cleans the print head, as described on page 126.) Follow these steps:

1.Make sure the EPSON Stylus Scan is turned on and not printing. Open the document cover, and then open the maintenance cover. The internal cover opens automatically.

Document cover

Maintenance cover

Internal cover

Cleaning button

2.Press the R cleaning button and hold it for about three seconds until the print head moves left and the Operate light begins flashing.

122Maintenance