You see one of these messages: Cannot find the scanner on the bus (Macintosh) or Scanner not ready (Windows).
■Make sure your EPSON Stylus Scan is turned on and securely connected to your computer or USB hub.
■If your EPSON Stylus Scan is connected to a USB hub, make sure it’s connected to a first tier hub. The first tier hub is the one closest to the host computer, if more than one hub is connected to the computer.
■If you’re copying, make sure SS 2500 is selected in the Chooser (Macintosh).
■If you’re using the EPSON TWAIN software, make sure you select EPSON Stylus Scan FB as your TWAIN source.
■Try restarting your computer. Make sure you turn on the EPSON Stylus Scan before you turn on your computer.
When you try to copy on a Macintosh, your original is scanned but not printed.
Open the Chooser, select SS 2500, and turn on background printing. Then try copying again.
144Solving Problems