Epson 2500 Using the Control Panel

Using the Control Panel

You can perform most basic copy operations from the EPSON Stylus Scan’s control panel.

LCD panel

Scan	Paper Size	Darker/Lighter	Copy	Stop/Clear
		Reduce/Enlarge B&W/Color Quality	Copies	Error Operate
			Set
		Hold for Menu Return	Item

note:

You can use the control panel’s Menu Mode to print a status sheet, set the bottom margin, change from U.S. to metric paper sizes, set the language on the LCD panel, or reset the control panel to the factory defaults. For detailed information about Menu Mode, see your electronic EPSON Stylus Scan 2500 Reference Guide.

The LCD panel displays the current copy settings. When you first turn on the EPSON Stylus Scan, you see these default settings: 100% B&W Normal 1. This means you’re set to produce one black and white copy, of the same size as the original document, at Normal quality (360 dpi resolution for everyday copying).

Follow these steps to copy using the control panel:

1.Press the P Operate button to turn on the EPSON Stylus Scan. Wait until the Operate light stops flashing.

2.Load paper in the feeder and place your original face down on the document table. Close the document cover.

3.Press the Paper Size button. A list of paper sizes appears in the LCD panel, with brackets around Letter. To change paper size, press the Paper Size button to move the brackets.

Paper Size

Copying 21