note:

If you’re scanning a printed picture that is not a film-processed photograph), make sure you choose Magazine, Newspaper, or Brochure. These settings will give you better scans and eliminate unwanted dot patterns.

4.Click Scan Photos. You see the PrintFun scanning window:

5.Select the type of document(s) you’re scanning from the Scan Material icons. If the basic settings listed beneath the icons are correct, go to step 8.

To change the basic settings chosen by the Scan Material selection, go to steps 6 and 7.

If you’re an advanced user and want more control over your settings, click the TWAIN button. See page 70 for information about using the TWAIN settings.

6.Choose one of the following Scan Mode buttons:

■Color: For any type of document or photo in color

■Grayscale: For black and white photographs or artwork with subtle shading

■Black&White: For text or drawings with no shading.

7.Choose one of the following Destination buttons:

■Screen: For images that will be displayed on the Internet or viewed on the screen only

■Printer (Normal): For text or images that will be printed normally

■Printer (Fine): For photographs or other images that will be printed at the highest quality or resolution (scanning is slower with this setting)

Printing 59