You see vertical banding or misalignment.
■Make sure the print head nozzles are not clogged. To run a cleaning cycle, see “Cleaning the Print Head” on page 126.
■Run the Print Head Alignment utility. See “Aligning the Print Head” on page 129 for instructions.
■Make sure the printable side of the paper is face up. It is usually whiter or shinier.
■Don’t use the High Speed setting in the printer software.
■Set the paper thickness switch to the 0 position.
paper thickness switch
■Place the EPSON Stylus Scan on a stable, level surface. Make sure none of the five rubber feet is missing from the bottom.
146Solving Problems