You see the following message: Please insert your WinFax Basic Edition installation media.

Remove your Windows CD-ROM and insert the EPSON Stylus Scan 2500 CD-ROM. Then click OK.

When you connect it to a parallel pass-through port on your Zip® drive, your EPSON Stylus Scan doesn’t work.

The EPSON Stylus Scan is not designed to work on this type of port. You must remove the Zip drive and connect it to a different port. (You may need to install a second parallel port.)

Connect the EPSON Stylus Scan directly to your computer’s built-in parallel port. Do not use a switch box. You can also connect the EPSON Stylus Scan to your USB port (Windows 98 only).

After you use your EPSON Stylus Scan with a parallel connection, your Zip drive doesn’t work when you reconnect it to the same parallel port.

You may need to reinstall your Zip drive software. To avoid this problem, you can disable the Zip drive in your Windows Device Manager before you connect the EPSON Stylus Scan. See your Windows Help for more information.

You’re printing over a network.

See your electronic EPSON Stylus Scan 2500 Reference Guide for computer configuration instructions.

Solving Problems 139