note:
If you’re trying to print or copy a large image, your computer may not have enough memory.
Only the Operate light is on, but nothing prints.
■Turn off the EPSON Stylus Scan and your computer. Make sure the interface cable is connected securely. (Use a fully shielded USB “AB” interface cable or an
■Make sure there’s no packing material inside the EPSON Stylus Scan or the automatic document feeder, if you’re using it.
■Run a printer check as described on page 135. If the check page printed, make sure your EPSON Stylus Scan and application software are installed correctly. If you’re printing on a network, you need to set up your EPSON Stylus Scan for network printing, as described in your electronic EPSON Stylus Scan 2500 Reference Guide.
The EPSON Stylus Scan sounds as though it is printing, but nothing prints.
Make sure the print head nozzles are not clogged. To run a cleaning cycle, see “Cleaning the Print Head” on page 126.
Your EPSON Stylus Scan makes noise when you turn it on or after it has been sitting for a while.
Your printer is performing routine maintenance.
140Solving Problems