note:
Always turn the printer off using the POperate button. Don’t switch off the power strip, or unplug the printer until the power light is off.
■If you use an extension cord with the EPSON Stylus Scan, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
■Turn off and unplug the EPSON Stylus Scan before cleaning. Clean with a damp cloth only. Do not spill liquid on the EPSON Stylus Scan.
■Do not block or cover the openings in the case or insert objects through the slots.
■Except as specifically explained in this manual, do not attempt to service the EPSON Stylus Scan yourself.
■Unplug the printer and refer servicing to qualified service personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.
Ink Cartridge Safety Instructions■Install the ink cartridge immediately after you remove it from its foil package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality.
■Under normal circumstances, ink will not come out of the cartridge. If it does get on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water.
■Keep ink cartridges out of the reach of children and do not drink the ink.
■Do not move the print head by hand; otherwise you may damage the printer.
Notices 161