To change the basic settings chosen by the Scan Material selection, go to steps 6 and 7.
If you’re an advanced user and want more control over your settings, click the TWAIN button. See page 70 for information about using the TWAIN settings.
6.Choose one of the following Scan Mode buttons:
■Color: For any type of document or photo in color
■Grayscale: For black and white photographs or artwork with subtle shading
■Black&White: For text or drawings with no shading.
7.Choose one of the following Destination buttons:
■Screen: For images that will be displayed on the Internet or viewed on the screen only
■Printer (Normal): For text or images that will be printed normally
■Printer (Fine): For photographs or other images that will be printed at the highest quality or resolution (scanning is slower with this setting)
8.If you’re using the document table to scan more than one image, click Scan Multiple Images.
9.If you’re using the optional automatic document feeder, click Enable ADF. Then go to step 12.
If you’re not using the automatic document feeder, go to step 10.
86Scanning