Epson 2500 Basic Scanning with TWAIN, Starting Your Scan

■Scanning for creativity (PhotoDeluxe projects)

■Scanning to an application

■Quick scanning

Basic Scanning with TWAIN

note:

The commands you choose in steps 3 and 5 differ from one host application to another. For example, with some host applications you might choose Acquire or Select Source from the File menu instead of Import.

If you’re using PhotoDeluxe, start by clicking GET AND FIX PHOTO, then click the arrow below the Scanners icon and select Stylus Scan FB as your input source. Click the Scanners icon to open the Scanning tab, then click Mode to open the

EPSON TWAIN window.

The basic scanning process involves a number of steps:

■Placing your photo or page on the document table

■Opening an application (such as PhotoDeluxe or Photoshop)

■Opening the TWAIN window and setting scan options

■Scanning and saving your scanned image

The first time you scan with your EPSON Stylus Scan 2500, you’ll also need to select it as your TWAIN source. For detailed instructions on using your EPSON TWAIN software, see your electronic EPSON Stylus Scan 2500 Reference Guide.

Starting Your Scan

Before you scan, make sure your scanning software is installed and your EPSON Stylus Scan is set up, connected to your computer, and turned on.

1.Place the document you want to scan face down on the document table. Position it so the horizontal and vertical edges are carefully aligned with the scales on the sides of the document table. Then close the document cover.

2.Start your application, for example, Adobe Photoshop.

3.From the File menu, choose Import, then select one of the following:

WSelect TWAIN 32 Source

MTWAIN Select

70Scanning