Epson 8000 multi-part, Turn on DIP, Use DIP switch, and turn off DIP, the printer you want to save information for

Using the Paper Memory Feature

Note: Be sure to remember or write down the memory area you use for each form.

3.Use DIP switch 3-2 to set the page length. If you plan to use forms of a different page length, use software commands to set the page length after you finish saving the overlapping form information.

Page length	DIP SW 3-2
11 inches	OFF
	I
12 inches	ON	I

4.Turn on DIP switch 3-5 and turn off DIP switch 3-6. This tells the printer you want to save information for multi-part forms that overlap slightly where they are joined together.

Note: Whenever DIP switch 3 - 5 is on, the skip over perforation feature is valid, regardless of DIP switch 3-3’s setting.

3-22Using the Printer