Options

Problemsolution

When you press the

FEED or LINE

ITED button, the printer does not feed the paper.

The puper jams or does tiot feed smoothly.

The printer may be on line..Before you press the FDRM FEED or LINE FEED button to feed the paper, be sure Wprinter is off line (the ON LINE light is out). See page 3-4

The paper cutter may not be correctly ins-. Remove the paper cutter and then rein&l it, making sure the mounting notches and pins fit together properly.

See page 5-19.

The paper cut&r may cut the paper so that the perforation at the end of the last printed page remains with the paper loaded in the printer. This perforation may cause a paper jam. Use the MICRO FEED buttons to position the paper so that the perforation at the end of the last printed page is even with or just past the cutting he. Be sure to set the page length to match your paper. See page 5-24.

You may be using multi-part forms that vary in thickness with the paper cutter. Multi-part forms that vary in thickness include forms with labels on them and forms that overlap sbghtly where they are glued together. Do not use these forms when the paper cutter is installed.

see page 5-19.

There may be some obstacle, such as a cable, in the way of the paper or something on top of the paper supply.

TroubIeshooting 7-21