Paper Cutter

3.If you loaded new paper onto the current tractor since the host time you cut off a document, you may need to adjust the

cutting position. Open the paper separator cover and use the MICRO FEED buttons to adjust the cutting position with the cutting line. Then close the paper separator cover.

Note: You,can set the cutting position, from 0.1 inches (3.0 mm) to 1.0 inches (25.4 mm) below the perforation at the end of the last printed page. The factory setting of the cutting position is the

0.1inches (3.0 mm) position below the perforation;

4.Press the TEAR OFF button. The printer cuts off your printed document and feeds the fresh paper back to the top of form position.

5-24Using the Printer Options