Epson 8000 indiv@ual, They irie’shown below:, The reassignment command, as the ESC * co&arid, %ut, 4-20Software and Graphics, Individual graphics commands

Graphics

When you run this program, it produces the following printout.

If you want to see the fiiure in ‘otbr densities, change the Y in line 130 to L or Z.

Individual graphics commands

There are four indiv@ual graphf~‘tommands” that are very much the same as the ESC * co&arid, %ut each one works ‘for only ‘one graphics option. .Note that these c&ttri&ds contam ~one?&s ‘variable than the ESC .A* command because they do not .need to, select a.

graphics		option.		I.
They irie’shown below:				I
	Command		Function	ESC + Format
	ESC K		Single-density	ESC	*	0
	ESC L		Double-density	ESC	*	1
	ESC Y		Double - density, high - speed	ESC * 2
	ESC Z		Quadruple-density	ESC	* 3

The reassignment command

The DFX-8000 has a command that allows you to change the graphics option assigned to any of the four individual graphics options commands.

The command looks like this:

ESC sm

4-20 Software and Graphics