Paper Cutter

Note: You can use the ESC EM printer command to change tractors only when the paper cutter is installed. For more information about this command, see the Command Summary in Chapter 9.

CAUTION: When you load paper on the tractor, be sure that the first page is tom off exactly at the perforation, and the first four holes in the paper fit over the sprocket unit pins.

Removing the paper cutter

To remove the paper cutter, follow the steps below. After you remove the paper cutter, store it in its original box and packing materials.

1.Cut off any printed document in the printer as described in the section above on cutting off a printed document.

2. Turn off the printer.

5-28Using the Printer Options