Options

ProblemSolution

The paper cutter is

in&a&&and the

printtwdoe6notfwtj continuousp8pa

I

properly (continued).

The paper supply may be too far from the printer. Position the paper supply within 3.28 feet (1 meter) of the printer.

The rear cover may be open. Close the rear cover before trying to feed the paper.

The paper may be caught on the paper separator. Be sure the edge of the first page emerges below the paper separator.

The sprocket units may not be positioned for the width of your paper. Move the right sprocket unit to the right to remove any slack in the paper or to the left to remove any excess tension in the paper.

The paper may not meet the specifications for the DFX-8000. Check that your paper is of the proper size, weight, and thickness. Seepages&5and&6.

The print head may be catching the binding area of your multi-part forms. Turn on DIP switch 3-7 to select the skip over binding function. See page 3-16.

7-22 Troubleshooting