Printing

ProblemSolution

Printed characters are not what you expect (continued).

The printer prints The wrong character table is selected. If graphic characters or your application program can send control

lines instead of the codes, specify the italic character table

italic characters you using ESC t 0. See page 9-34.

selected.

You can also set a DIP switch to select the italic character table. To do this, turn off the printer, turn off DIP switch l-3, and then turn on the printer. See page 3-49.

The wrong inkmational The wrong international character set is characters are printed. selected. If your application program can

send control codes, specify the desired international character set using ESC R n. See page 9-34.

You can also set a DIP switch to select an international character set. To do this, turn off the printer, set DIP switches 1-6, 1-7, and l-8 to select the character set you want, and then turn on the printer.

see page 3-47.

P&ted characters are Condensed mode may be selected. If your

smaller than you application program can send control

expect.codes, cancel condensed mode using DC2. See page 9-26.

7-8Troubleshooting