Using the Paper Memory Feature

14.Close the top cover. The printer checks your paper’s thickness at various points and saves this information. (This takes the printer

a certain amount time to complete.) When it is done, the printer -beeps and advances the form one page. The printer then goes off line.

Notes:

•If you close the top cover before setting the label’s location, the printer beeps several times to let you know an error has occurred.

*In step 14, the printer advances the form one page, according to the setting of DIP switch 3-2.If your form has a different page length, set the correct page length with software commands and adjust the top of form position accordingly.

You can print on these forms even if you turn the printer off and then back on. To use other types of paper, see the section on loading paper format information from memory later in this chapter.

CAUTION: When you print on these forms, make sure that the printing fits within the printable area. The printable area is shown in Chapter 8.

Using the Printer 3-29