4.Select the paper type by turning DIP switches 5-1, 5-2, and 5-3 on or off as shown below.
Overlapping multi-part forms | SW 5-1 |
| |
Inactive | OFF |
| |
Active | ON |
| |
| |
Multi-part forms with labels | SW 5-2 |
| |
Inactive | OFF |
| |
Active | ON |
| |
| |
Skip over binding | SW 5-3 |
| |
Inactive | OFF |
| |
Active | ON |
| |
5.For overlapping multi-part forms without labels, hold down the Paper Select button and turn on the printer. (The printer beeps once when it saves settings for memory a and twice for memory b.) The printer saves the overlapping form information in the memory area you selected. When the information is saved, the printer beeps and is ready to print. You have now finished all of the steps for saving information on forms.
For continuous forms with labels or overlapping multi-part forms with labels, hold down the Paper Select button and turn on the printer. (The printer beeps once when it saves settings for memory a and twice for memory b.) The printer loads and checks the forms. When the check is finished, the printer beeps continuously until you open the printer’s top cover.