Power supplyThe lights come on briefly but then go off and stay off.

Cause

What to do

The printer’s voltage rating may not match the voltage of your electrical outlet.

Check the printer and the outlet voltage ratings. If the voltages do not match, unplug the printer immediately and contact your dealer.

wWarning:

Do not reconnect the power cord to an electrical outlet that does not have matching voltage.

The printer does not work and the control panel lights are off.

Cause

What to do

The power cord is not properly plugged into the electrical outlet.

Turn off the printer, make sure the power cord is firmly plugged into the electrical outlet, and turn the printer back on.

The printer is turned off.

Press the Power switch located on the lower right side of the printer. The Power light should come on.

The electrical outlet is

Use a different outlet.

controlled by an outside

 

switch or automatic timer.

 

 

 

The electrical outlet is out of order.

Plug another electrical device into the outlet to determine whether the outlet is working. If it is not, use a different outlet.

A printer error has occurred and the control panel lights go off after 12 seconds.

Turn off the printer and leave it for several minutes; then turn on the printer again. If the error occurs again, contact your dealer.

8-8Troubleshooting