RThe binding area should be flat and should have no creases.
RThe sprocket holes of all sheets in the form should be aligned properly.
RThe binding position should be outside the printable area.
Width | 101 to 406 mm (4 to 16 inches) |
Length/page | 101 to 431 mm (4 to 17 inches) |
Number of copies |
|
Front | 7 sheets (1 original + 6 copies) |
Rear | 6 sheets (1 original + 5 copies) |
Total thickness |
|
Front | 0.53 mm (0.021 inch) maximum |
Rear | 0.46 mm (0.018 inch) maximum |
Weight |
|
Single sheets | 52.6 to 82.7 g/m2 (14 to 22 lb) |
41.4 to 56.4 g/m2 (11 to 15 lb) (weight/part) | |
| and within the total thickness |
Quality Printable area
printable area
Plain paper, recycled paper, and carbonless
AThe minimum top margin (below the perforation) is 2.6 mm (0.1 inch).
B | A | B | The minimum bottom margin |
|
| (above the perforation) is 4.2 mm | |
|
|
| |
| printable area |
| (0.165 inch). |
|
|
| |
|
| C | The minimum left or right margin is |
|
|
| 13 mm (0.51 inch). |
| C |
| The maximum printable width is |
|
| 345.4 mm (13.6 inches). | |
| C |
|
|
Note:
Position the sprockets or set your application software so that the printer does not print outside the printable area.