Epson 8500 Overlapping multi-partforms with labels

Area measurements

A19 mm (0.75 inch) or more

B21.2 mm (0.84 inch) or more

C4.2 mm (0.17 inch) or more

Overlapping multi-part forms with labels

Same as labels except for the following:

A

the top of	B
overlapping form

the bottom edge of overlapping form

A		(side view)
						backing sheet
		label		D			A
	perforation		E
		C
		G			F
		H				the bottom edge of
						the glue point area

The label on your form should be placed within the shaded area above, but not on the vertical or horizontal perforation.

Area measurements

A13 ± 3 mm (0.51 ± 0.12 inch)

B80 mm (3.15 inches)

C4.2 mm (0.165 inch)

DThickness of the area where the label is attached:

0.53mm (0.02 inch) or less

EFrom the perforation to the top of the next overlapping form:

3.3mm (0.13 inch) or more

FFrom the perforation to the bottom edge of the glue point area: 17 mm (0.67 inch) or less

GFrom the perforation to the bottom edge of the previous overlapping form: 13.3 mm (0.52 inch) or less

HTotal thickness including glue point dilation:

0.7mm (0.028 inch) or less

Specifications A-11