3.If you loaded new paper onto the current tractor since the last time you cut off a document, you may need to adjust the cutting position. Open the paper separator cover and use the Micro Feed buttons to adjust the cutting position with the cutting line. Then close the paper separator cover.

6

Note:

You can set the cutting position, from 3.0 mm (0.12 inch) to

25.4mm (1.0 inch) below the perforation at the end of the last printed page. The factory setting of the cutting position is

3.0mm (0.12 inch) below the position.

4.Press the Tear Off button. The printer cuts off your printed document and feeds the fresh paper back to the top-of-form position.

Using Printer Options 6-29