Labels
RLabels should be securely attached to the backing sheet and the label surface should be flat.
RLabels should not peel off their backing sheet under the conditions below.
label | wrapping drum radius | 27 mm | |
| wrapping angle | 180° | |
| wrapping time | 24 hours | |
27 mm | ambient temperature | 40°C | |
ambient humidity | 30% | ||
|
RWhen using labels whose backing sheet is entirely covered, make
sure the cuts around the edges of the labels are perforated. | A | |
| ||
| several uncut areas |
|
label sheet | on each side |
|
|
| |
backing sheet | label |
|
|
| |
RWhen using labels whose backing sheet is not covered with the label material, see the illustration below.
label
corner radius is 2 to 3 mm
label
backing sheet
Backing sheet |
|
Width | 101 to 406 mm (4 to 16 inches) |
Length | 88.9 mm (3.5 inches) minimum |
Specifications